L-Acoustics Pull-Back Frame for KARA Speakers 100196780 and a dedicated master fader

and a dedicated master fader dynamically follows the Mix selection

Footswitch Selector for Balanced InputsThe HotShot ABi is a balanced signal selector that allows you to instantly select between two sources by depressing a latching footswitch

Should hum or buzz caused by ground loops be encountered

3HE x 19" x 368mm deep (from front strip)

DCi gives you a tremendous audio advantage – at a much lower cost

L-Acoustics Pull-Back Frame for KARA Speakers 100196780 and a dedicated master faderL Acoustics Pull Back Frame for KARA Speakers The L ACOUSTICS KARA PULLBACK rigging accessory will allow setting the KARA array in a pullback configuration. It attaches to the bottom enclosure of the array and to the hook or stinger of an additional motor. The KARA PULLBACK is a plate on which is attached one shackle fitted with 19 mm 0. 75 inch diameter bolt and a safety pin. Features: Dimensions: (L x H x D) 668 x 40 x 511. 2 mm 26. 3 x 1. 6 x 20. 1